Polyethylene PE300 sheet – HDPE is a lightweight and strong engineering plastic with high impact strength. It also has excellent chemical resistance with very low moisture absorption and is FDA approved. HDPE can also be fabricated and welded.
Applications
Chutes, silos, tanks and hoppers.
Key Features
• Temperature: -50°C up to +80°C.
• Lightweight and strong.
• Good resistance to chemicals and low temperatures.
• Very low moisture absorption.
• FDA approved for contact with food.
• Easily machined, fabricated and welded.
Size and Color
| Color | Sheet Size (mm) | Sheet Thickness (mm) |
| White/Black | 1000×1000 | 2-30 |
| White/Black | 2000×1000 | 2-30 |
| White/Black | 3000×1000 | 2-30 |
| White/Black | 4000×1000 | 2-30 |
For other color, yellow, blue, red, green are all available, however, there is 5 ton MOQ limitation.
Technical Data
| Physical Properties | Test | Unit | Result | ||||
| Specific gravity | ISO1183 | g/cm³ | 0.96 | ||||
| Water absorption | ISO62 | % | 0.01 | ||||
| Maximum service temp. Upper temp.
limit (no stronger mechanical stree involved) |
– | ℃ | 80 | ||||
| Lower temp. | – | ℃ | 50 | ||||
| Mechnical Properties | Test | Unit | Result | ||||
| Tensile strength at yield | ISO 527 | MPa | 22 | ||||
| Elongation at yield | ISO 527 | % | 9 | ||||
| Tensile strength at break | ISO 527 | MPa | – | ||||
| Elongation at break | ISO 527 | % | 300 | ||||
| Impact strength | ISO 179 | kJ/㎡ | no break | ||||
| Notch impact strength | ISO 179 | kJ/㎡ | 19 | ||||
| Ball indentation/ Rockwell hardness | ISO 2039-1 | MPa | 40 | ||||
| Shore-D | DIN 53505 | – | 64 | ||||
| Flexural strength | ISO 178 | MPa | – | ||||
| Modulas of elasticity | ISO 527 | MPa | 900 |
